Do you experience a blockage in your shower head? Does your showerhead squirt water in diverse directions? Nowadays, the clogged and a showerhead functioning improperly is really frustrating. In order to get rid of such situations, it is a must to clean your shower frequently to enjoy a better bathing experience. The reason behind improper dispersing of water through the holes of your shower is the minerals that often block these holes. As a result, your showerhead may either get clogged completely or spray out the water in inappropriate directions.
This issue can only be fixed by taking out all the unwanted mineral deposits from the holes to let the water spray out evenly in a proper direction. Though there are various remedies possible to open up the clogged holes, treating your showerhead with the combination of vinegar and baking soda can turn out to be the best possible solution. So, if you are wondering “how to clean showerhead with vinegar and baking soda“? Then read the guide.
Go-To-Go Guide on How to Clean Showerhead with Vinegar and Baking Soda
Method 1: Use Vinegar
Since vinegar is rich in the elements that are especially known for the efficient break down of minerals, you can clean the showerhead with vinegar.
Step 1 – take a bowl and fill it with vinegar. The quantity of vinegar should be adequate enough to immerse the entire showerhead in it.
Step 2 – put in your showerhead in the bowl containing vinegar and let the fixture get drenched in the solution overnight. The vinegar comprising acids go through the fixture and break down the minerals from the showerhead holes and thereby open up the blocked holes.
Step 3 – in the next morning, take out the showerhead from the vinegar solution and use a toothbrush to clean and remove the residuals of mineral deposits.
Step 4 – wash the showerhead in cold water for 2-3 minutes and then reinstall it.
Method 2: Use Vinegar with Baking Soda
Apart from cleaning up the dark stains, baking soda can also be utilized for dislodging the jammed particles. The combination of vinegar and baking soda is mainly known for their properties of clearing dust, dirt, and other such deposits.
Step 1 – fill a bowl with a cup of vinegar and pour 4-5 tablespoons of baking soda in it. Make sure to use gloves while dealing with baking soda as the same is abrasive and can harm your hands. Moreover, perform this step in the basin as the chemical reaction (sodium bicarbonate) evoked from the combination of vinegar and baking soda results in the formation of bubbles.
Step 2 – dip your showerhead in the chemical solution and allow it some time to soak.
Step 3 – pick up a pin or needle and softly rub your showerhead to clean of the remaining deposits. You can also opt for a toothbrush to do the same.
Step 4 – rinse the showerhead with cold tap water unless all the residual of debris in the holes disappears. Pat dry the showerhead using a towel and fix the fixture in its original place.
So following these steps one can easily unclog normal or handheld showerhead within a short period. So now you don’t need to invest in calling a repairer and getting the unclogging services done. Instead of using the vinegar and baking soda solution can aid you to eliminate out all the unwanted stuff from your showerhead holes. So what are you waiting for? If you’re dealing with the same issue then try out the above-mentioned treatment and experience the best shower. All the best!